|
Push-To-Connect Fittings: Available for AVR, AV, and MFP Series
• Eliminate labor and material required to install threaded fittings
• No threads to leak from improper assembly
• No tools required, simply push tubing to connect
• Press release button and pull tubing to connect
• Fittings are normally installed on the air supply or/and vacuum connections
• Tubing OD of 1/8", 5/32", and 1/4"
To determine the Part Number, select the required pump from the chart below and add
one of the following designations:
AV and AVR Models:
• For air supply connection only...
• For vacuum supply connection only...
• For air and vacuum connections...
MFPM Models:
• For air supply connection only...
Full Dimensions
AVR Series
|
|
Performance
Considerations
for Minimal Air Usage
Vacuum Levels
For High Vacuum Level::
• Select the Model that
provides
27"Hg
For Medium Vacuum Levels:
• Select the Model that
provides
15-20"Hg
This results in a substantial
reduction in air usage.
Vacuum Flow
Substantial vacuum flow is developed at low operating pressures.
• Initially the curves are very steep.
The operating pressure at 40-50 psi
provides maximum vacuum flow.
• Higher pressures do not increase the vacuum flow but will increase
air usage.
Applications
• Pick-and-Place
• Material handling
• End-of-Arm Tooling
• Evacuation of Chambers & Containers
|
|